hp, flash media, flash memory, HP memory, CHEAP COMPACT FLASH, acernote light, cheap compact flash memory, hp laserjet memory, flash memory reader, aceracros, emachine upgrade, emachine upgrades, flash memory chips, high speed compact flash, high speed compactflash, hp ram, Ezbook 700, HPM-10, MS-5169, MS-6119, MS-6147, MS-6156

What does the CL stand for on memory chips? CL stands for CAS Latency. When a module is labeled CL2 it means there are only two clock cycles before the module can send the first block of data. CL3 means there are three cycles before the first block of data is sent. Cl2 is considered to be a small percentage faster than CL3 modules. PC100 and PC133 modules are pavilion750c manufactured as both CL2 and CL3. You will need to check with your system''s requirements to see which option is compatible with your system. Does it matter which slots I plug my new module in? In general, you will get the best performance if you put the largest module (in megabytes) in the lowest-numbered slot. For example, if your computer comes with 32MB of removable memory and you want to add 128MB, it would be best to put the 128MB module into slot 0 and the 32MB module into slot 1. My system will not boot after installing your memory? Are you getting an error message on the monitor? If it pavilion750c states a Non-System Disk error occurred, check to make sure that you do not have a non-bootable disk in the floppy drive, or even the CD-ROM drive if your system can boot to the CD drive.

What does the CL stand for on memory chips? CL stands for CAS Latency. When a module is labeled CL2 it means there are only two clock cycles before the module can send the first block of data. CL3 means there are three cycles before the first block of data is sent. Cl2 is considered to be a small percentage faster than CL3 modules. PC100 and PC133 modules are pavilion750c manufactured as both CL2 and CL3. You will need to check with your system''s requirements to see which option is compatible with your system. Does it matter which slots I plug my new module in? In general, you will get the best performance if you put the largest module (in megabytes) in the lowest-numbered slot. For example, if your computer comes with 32MB of removable memory and you want to add 128MB, it would be best to put the 128MB module into slot 0 and the 32MB module into slot 1. My system will not boot after installing your memory? Are you getting an error message on the monitor? If it pavilion750c states a Non-System Disk error occurred, check to make sure that you do not have a non-bootable disk in the floppy drive, or even the CD-ROM drive if your system can boot to the CD drive.

©2003 www.flash-memory-high-speed.com. All rights reserved.